Imperial Bellator Star Dreadnought for Star Wars Armada 342mm
from $80.00
All products come unpainted and unassembled.
Sculpt updated DEC 22 2024
The Bellator-class Star Dreadnought is scaled to work with Star Wars Armada as a proxy or homebrew ship.
https://youtu.be/dLGQtweRav0
This model was sculpted by Ethan LeRoith
The ship is 342mm long
The current production design of the ship has a traditional armada keyhole close to the engine section of the rear piece and uses an ssd cradle keyhole adaptor to hold the front of the ship up
The ship comes in two parts and is sold standalone unless the customer selects the ship, large stand option. In which case the ship will come with a SSD dual large Utar Games and Designs Star Wars Armada compatible stand. The ship will have some drainage holes in the bottom of the models
Homebrew Card suggestion: https://archive.kdyards.com/ships.view.php?id=2812
The Lore: https://starwars.fandom.com/wiki/Bellator-class_dreadnought/Legends
These models come unpainted and unassembled and can be ordered as a ship or a ship with a stand
Items are sold As-is. 3d printed parts may have fragments of residual support material that may need to be removed by the end user. 3d printed items can have minor imperfections. Models should be primed with fine primer prior to painting for best results. Color of material used is subject to supply on hand and may differ from photos or descriptions.
THIS WEB STORE AND ITS CONTENTS ARE COMPLETELY UNOFFICIAL, AND ITS CONTENTS ARE IN NO WAY ENDORSED, OR AFFILIATED WITH DISNEY OR LUCASARTS
I use listing quantities to roughly estimate how many I can make and ship within processing time, most items are made-to-order, except some of the most popular color/item combos.
Sculpt updated DEC 22 2024
The Bellator-class Star Dreadnought is scaled to work with Star Wars Armada as a proxy or homebrew ship.
https://youtu.be/dLGQtweRav0
This model was sculpted by Ethan LeRoith
The ship is 342mm long
The current production design of the ship has a traditional armada keyhole close to the engine section of the rear piece and uses an ssd cradle keyhole adaptor to hold the front of the ship up
The ship comes in two parts and is sold standalone unless the customer selects the ship, large stand option. In which case the ship will come with a SSD dual large Utar Games and Designs Star Wars Armada compatible stand. The ship will have some drainage holes in the bottom of the models
Homebrew Card suggestion: https://archive.kdyards.com/ships.view.php?id=2812
The Lore: https://starwars.fandom.com/wiki/Bellator-class_dreadnought/Legends
These models come unpainted and unassembled and can be ordered as a ship or a ship with a stand
Items are sold As-is. 3d printed parts may have fragments of residual support material that may need to be removed by the end user. 3d printed items can have minor imperfections. Models should be primed with fine primer prior to painting for best results. Color of material used is subject to supply on hand and may differ from photos or descriptions.
THIS WEB STORE AND ITS CONTENTS ARE COMPLETELY UNOFFICIAL, AND ITS CONTENTS ARE IN NO WAY ENDORSED, OR AFFILIATED WITH DISNEY OR LUCASARTS
I use listing quantities to roughly estimate how many I can make and ship within processing time, most items are made-to-order, except some of the most popular color/item combos.
Pattern:
Quantity:
All products come unpainted and unassembled.
Sculpt updated DEC 22 2024
The Bellator-class Star Dreadnought is scaled to work with Star Wars Armada as a proxy or homebrew ship.
https://youtu.be/dLGQtweRav0
This model was sculpted by Ethan LeRoith
The ship is 342mm long
The current production design of the ship has a traditional armada keyhole close to the engine section of the rear piece and uses an ssd cradle keyhole adaptor to hold the front of the ship up
The ship comes in two parts and is sold standalone unless the customer selects the ship, large stand option. In which case the ship will come with a SSD dual large Utar Games and Designs Star Wars Armada compatible stand. The ship will have some drainage holes in the bottom of the models
Homebrew Card suggestion: https://archive.kdyards.com/ships.view.php?id=2812
The Lore: https://starwars.fandom.com/wiki/Bellator-class_dreadnought/Legends
These models come unpainted and unassembled and can be ordered as a ship or a ship with a stand
Items are sold As-is. 3d printed parts may have fragments of residual support material that may need to be removed by the end user. 3d printed items can have minor imperfections. Models should be primed with fine primer prior to painting for best results. Color of material used is subject to supply on hand and may differ from photos or descriptions.
THIS WEB STORE AND ITS CONTENTS ARE COMPLETELY UNOFFICIAL, AND ITS CONTENTS ARE IN NO WAY ENDORSED, OR AFFILIATED WITH DISNEY OR LUCASARTS
I use listing quantities to roughly estimate how many I can make and ship within processing time, most items are made-to-order, except some of the most popular color/item combos.
Sculpt updated DEC 22 2024
The Bellator-class Star Dreadnought is scaled to work with Star Wars Armada as a proxy or homebrew ship.
https://youtu.be/dLGQtweRav0
This model was sculpted by Ethan LeRoith
The ship is 342mm long
The current production design of the ship has a traditional armada keyhole close to the engine section of the rear piece and uses an ssd cradle keyhole adaptor to hold the front of the ship up
The ship comes in two parts and is sold standalone unless the customer selects the ship, large stand option. In which case the ship will come with a SSD dual large Utar Games and Designs Star Wars Armada compatible stand. The ship will have some drainage holes in the bottom of the models
Homebrew Card suggestion: https://archive.kdyards.com/ships.view.php?id=2812
The Lore: https://starwars.fandom.com/wiki/Bellator-class_dreadnought/Legends
These models come unpainted and unassembled and can be ordered as a ship or a ship with a stand
Items are sold As-is. 3d printed parts may have fragments of residual support material that may need to be removed by the end user. 3d printed items can have minor imperfections. Models should be primed with fine primer prior to painting for best results. Color of material used is subject to supply on hand and may differ from photos or descriptions.
THIS WEB STORE AND ITS CONTENTS ARE COMPLETELY UNOFFICIAL, AND ITS CONTENTS ARE IN NO WAY ENDORSED, OR AFFILIATED WITH DISNEY OR LUCASARTS
I use listing quantities to roughly estimate how many I can make and ship within processing time, most items are made-to-order, except some of the most popular color/item combos.
All products come unpainted and unassembled.
Sculpt updated DEC 22 2024
The Bellator-class Star Dreadnought is scaled to work with Star Wars Armada as a proxy or homebrew ship.
https://youtu.be/dLGQtweRav0
This model was sculpted by Ethan LeRoith
The ship is 342mm long
The current production design of the ship has a traditional armada keyhole close to the engine section of the rear piece and uses an ssd cradle keyhole adaptor to hold the front of the ship up
The ship comes in two parts and is sold standalone unless the customer selects the ship, large stand option. In which case the ship will come with a SSD dual large Utar Games and Designs Star Wars Armada compatible stand. The ship will have some drainage holes in the bottom of the models
Homebrew Card suggestion: https://archive.kdyards.com/ships.view.php?id=2812
The Lore: https://starwars.fandom.com/wiki/Bellator-class_dreadnought/Legends
These models come unpainted and unassembled and can be ordered as a ship or a ship with a stand
Items are sold As-is. 3d printed parts may have fragments of residual support material that may need to be removed by the end user. 3d printed items can have minor imperfections. Models should be primed with fine primer prior to painting for best results. Color of material used is subject to supply on hand and may differ from photos or descriptions.
THIS WEB STORE AND ITS CONTENTS ARE COMPLETELY UNOFFICIAL, AND ITS CONTENTS ARE IN NO WAY ENDORSED, OR AFFILIATED WITH DISNEY OR LUCASARTS
I use listing quantities to roughly estimate how many I can make and ship within processing time, most items are made-to-order, except some of the most popular color/item combos.
Sculpt updated DEC 22 2024
The Bellator-class Star Dreadnought is scaled to work with Star Wars Armada as a proxy or homebrew ship.
https://youtu.be/dLGQtweRav0
This model was sculpted by Ethan LeRoith
The ship is 342mm long
The current production design of the ship has a traditional armada keyhole close to the engine section of the rear piece and uses an ssd cradle keyhole adaptor to hold the front of the ship up
The ship comes in two parts and is sold standalone unless the customer selects the ship, large stand option. In which case the ship will come with a SSD dual large Utar Games and Designs Star Wars Armada compatible stand. The ship will have some drainage holes in the bottom of the models
Homebrew Card suggestion: https://archive.kdyards.com/ships.view.php?id=2812
The Lore: https://starwars.fandom.com/wiki/Bellator-class_dreadnought/Legends
These models come unpainted and unassembled and can be ordered as a ship or a ship with a stand
Items are sold As-is. 3d printed parts may have fragments of residual support material that may need to be removed by the end user. 3d printed items can have minor imperfections. Models should be primed with fine primer prior to painting for best results. Color of material used is subject to supply on hand and may differ from photos or descriptions.
THIS WEB STORE AND ITS CONTENTS ARE COMPLETELY UNOFFICIAL, AND ITS CONTENTS ARE IN NO WAY ENDORSED, OR AFFILIATED WITH DISNEY OR LUCASARTS
I use listing quantities to roughly estimate how many I can make and ship within processing time, most items are made-to-order, except some of the most popular color/item combos.