Republic Praetor mark 1 Battlecruiser for Star Wars Armada miniatures games
from $50.00
All products come unpainted and unassembled.
"The Praetor-class battlecruiser, also known as the Praetor-class Star Battlecruiser or the Praetor-class battle cruiser, was a warship produced by Kuat Drive Yards in the final years of the Galactic Republic. A four-thousand-meter battlecruiser, the Praetor-class was the successor of the Procurator-class Star Battlecruiser, though both were restricted in terms of hyperdrive capability and armament due to the Ruusan Reformation. "
This model was sculpted by Ravensfell as a commission for us. Visit them here: https://www.thingiverse.com/ravensfell/designs
The model comes in two parts: the Nose and the Main Hull, the main hull is hollow
The ship measures over 287mm long
Homebrew Card suggestion: https://archive.kdyards.com/ships.view.php?id=21483
The Lore: https://starwars.fandom.com/wiki/Praetor-class_Star_Battlecruiser
These models come unpainted and unassembled and can be ordered as a ship or a ship with a stand
Items are sold As-is. 3d printed parts may have fragments of residual support material that may need to be removed by the end user. 3d printed items can have minor imperfections. Models should be primed with fine primer prior to painting for best results. Color of material used is subject to supply on hand and may differ from photos or descriptions.
THIS WEB STORE AND ITS CONTENTS ARE COMPLETELY UNOFFICIAL, AND ITS CONTENTS ARE IN NO WAY ENDORSED, OR AFFILIATED WITH DISNEY OR LUCASARTS
I use listing quantities to roughly estimate how many I can make and ship within processing time, most items are made-to-order, except some of the most popular color/item combos.
"The Praetor-class battlecruiser, also known as the Praetor-class Star Battlecruiser or the Praetor-class battle cruiser, was a warship produced by Kuat Drive Yards in the final years of the Galactic Republic. A four-thousand-meter battlecruiser, the Praetor-class was the successor of the Procurator-class Star Battlecruiser, though both were restricted in terms of hyperdrive capability and armament due to the Ruusan Reformation. "
This model was sculpted by Ravensfell as a commission for us. Visit them here: https://www.thingiverse.com/ravensfell/designs
The model comes in two parts: the Nose and the Main Hull, the main hull is hollow
The ship measures over 287mm long
Homebrew Card suggestion: https://archive.kdyards.com/ships.view.php?id=21483
The Lore: https://starwars.fandom.com/wiki/Praetor-class_Star_Battlecruiser
These models come unpainted and unassembled and can be ordered as a ship or a ship with a stand
Items are sold As-is. 3d printed parts may have fragments of residual support material that may need to be removed by the end user. 3d printed items can have minor imperfections. Models should be primed with fine primer prior to painting for best results. Color of material used is subject to supply on hand and may differ from photos or descriptions.
THIS WEB STORE AND ITS CONTENTS ARE COMPLETELY UNOFFICIAL, AND ITS CONTENTS ARE IN NO WAY ENDORSED, OR AFFILIATED WITH DISNEY OR LUCASARTS
I use listing quantities to roughly estimate how many I can make and ship within processing time, most items are made-to-order, except some of the most popular color/item combos.
Pattern:
Quantity:
All products come unpainted and unassembled.
"The Praetor-class battlecruiser, also known as the Praetor-class Star Battlecruiser or the Praetor-class battle cruiser, was a warship produced by Kuat Drive Yards in the final years of the Galactic Republic. A four-thousand-meter battlecruiser, the Praetor-class was the successor of the Procurator-class Star Battlecruiser, though both were restricted in terms of hyperdrive capability and armament due to the Ruusan Reformation. "
This model was sculpted by Ravensfell as a commission for us. Visit them here: https://www.thingiverse.com/ravensfell/designs
The model comes in two parts: the Nose and the Main Hull, the main hull is hollow
The ship measures over 287mm long
Homebrew Card suggestion: https://archive.kdyards.com/ships.view.php?id=21483
The Lore: https://starwars.fandom.com/wiki/Praetor-class_Star_Battlecruiser
These models come unpainted and unassembled and can be ordered as a ship or a ship with a stand
Items are sold As-is. 3d printed parts may have fragments of residual support material that may need to be removed by the end user. 3d printed items can have minor imperfections. Models should be primed with fine primer prior to painting for best results. Color of material used is subject to supply on hand and may differ from photos or descriptions.
THIS WEB STORE AND ITS CONTENTS ARE COMPLETELY UNOFFICIAL, AND ITS CONTENTS ARE IN NO WAY ENDORSED, OR AFFILIATED WITH DISNEY OR LUCASARTS
I use listing quantities to roughly estimate how many I can make and ship within processing time, most items are made-to-order, except some of the most popular color/item combos.
"The Praetor-class battlecruiser, also known as the Praetor-class Star Battlecruiser or the Praetor-class battle cruiser, was a warship produced by Kuat Drive Yards in the final years of the Galactic Republic. A four-thousand-meter battlecruiser, the Praetor-class was the successor of the Procurator-class Star Battlecruiser, though both were restricted in terms of hyperdrive capability and armament due to the Ruusan Reformation. "
This model was sculpted by Ravensfell as a commission for us. Visit them here: https://www.thingiverse.com/ravensfell/designs
The model comes in two parts: the Nose and the Main Hull, the main hull is hollow
The ship measures over 287mm long
Homebrew Card suggestion: https://archive.kdyards.com/ships.view.php?id=21483
The Lore: https://starwars.fandom.com/wiki/Praetor-class_Star_Battlecruiser
These models come unpainted and unassembled and can be ordered as a ship or a ship with a stand
Items are sold As-is. 3d printed parts may have fragments of residual support material that may need to be removed by the end user. 3d printed items can have minor imperfections. Models should be primed with fine primer prior to painting for best results. Color of material used is subject to supply on hand and may differ from photos or descriptions.
THIS WEB STORE AND ITS CONTENTS ARE COMPLETELY UNOFFICIAL, AND ITS CONTENTS ARE IN NO WAY ENDORSED, OR AFFILIATED WITH DISNEY OR LUCASARTS
I use listing quantities to roughly estimate how many I can make and ship within processing time, most items are made-to-order, except some of the most popular color/item combos.
All products come unpainted and unassembled.
"The Praetor-class battlecruiser, also known as the Praetor-class Star Battlecruiser or the Praetor-class battle cruiser, was a warship produced by Kuat Drive Yards in the final years of the Galactic Republic. A four-thousand-meter battlecruiser, the Praetor-class was the successor of the Procurator-class Star Battlecruiser, though both were restricted in terms of hyperdrive capability and armament due to the Ruusan Reformation. "
This model was sculpted by Ravensfell as a commission for us. Visit them here: https://www.thingiverse.com/ravensfell/designs
The model comes in two parts: the Nose and the Main Hull, the main hull is hollow
The ship measures over 287mm long
Homebrew Card suggestion: https://archive.kdyards.com/ships.view.php?id=21483
The Lore: https://starwars.fandom.com/wiki/Praetor-class_Star_Battlecruiser
These models come unpainted and unassembled and can be ordered as a ship or a ship with a stand
Items are sold As-is. 3d printed parts may have fragments of residual support material that may need to be removed by the end user. 3d printed items can have minor imperfections. Models should be primed with fine primer prior to painting for best results. Color of material used is subject to supply on hand and may differ from photos or descriptions.
THIS WEB STORE AND ITS CONTENTS ARE COMPLETELY UNOFFICIAL, AND ITS CONTENTS ARE IN NO WAY ENDORSED, OR AFFILIATED WITH DISNEY OR LUCASARTS
I use listing quantities to roughly estimate how many I can make and ship within processing time, most items are made-to-order, except some of the most popular color/item combos.
"The Praetor-class battlecruiser, also known as the Praetor-class Star Battlecruiser or the Praetor-class battle cruiser, was a warship produced by Kuat Drive Yards in the final years of the Galactic Republic. A four-thousand-meter battlecruiser, the Praetor-class was the successor of the Procurator-class Star Battlecruiser, though both were restricted in terms of hyperdrive capability and armament due to the Ruusan Reformation. "
This model was sculpted by Ravensfell as a commission for us. Visit them here: https://www.thingiverse.com/ravensfell/designs
The model comes in two parts: the Nose and the Main Hull, the main hull is hollow
The ship measures over 287mm long
Homebrew Card suggestion: https://archive.kdyards.com/ships.view.php?id=21483
The Lore: https://starwars.fandom.com/wiki/Praetor-class_Star_Battlecruiser
These models come unpainted and unassembled and can be ordered as a ship or a ship with a stand
Items are sold As-is. 3d printed parts may have fragments of residual support material that may need to be removed by the end user. 3d printed items can have minor imperfections. Models should be primed with fine primer prior to painting for best results. Color of material used is subject to supply on hand and may differ from photos or descriptions.
THIS WEB STORE AND ITS CONTENTS ARE COMPLETELY UNOFFICIAL, AND ITS CONTENTS ARE IN NO WAY ENDORSED, OR AFFILIATED WITH DISNEY OR LUCASARTS
I use listing quantities to roughly estimate how many I can make and ship within processing time, most items are made-to-order, except some of the most popular color/item combos.